ESR IS MEASURED AT 100 KHZ, RIPPLE CURRENT IS MEASURED AT 100KHZ, 45CEL
Capacitance:
330 µF
Capacitor Type:
TANTALUM CAPACITOR
Dielectric Material:
TANTALUM (SOLID POLYMER)
ESR:
6 mΩ
Height:
1.8 mm
JESD-609 Code:
e4
Leakage Current:
0.132 mA
Length:
7.3 mm
Mounting Feature:
SURFACE MOUNT
Negative Tolerance:
20%
Number of Terminals:
2
Operating Temperature-Max:
105 °C
Operating Temperature-Min:
-55 °C
Package Shape:
RECTANGULAR PACKAGE
Package Style:
SMT
Packing Method:
TR, EMBOSSED, 13 INCH
Polarity:
POLARIZED
Positive Tolerance:
20%
Rated (DC) Voltage (URdc):
2 V
Ripple Current:
4700 mA
Size Code:
2917
Surface Mount:
YES
Tan Delta:
0.1
Terminal Finish:
Palladium/Gold (Pd/Au)
Terminal Shape:
J BEND
Width:
4.3 mm
2TPF330M6 Frequently Asked Questions (FAQs)
A good PCB layout for the 2TPF330M6 involves keeping the input and output traces short and separate, using a solid ground plane, and placing the capacitor close to the IC. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure the 2TPF330M6 operates within its SOA, monitor the input voltage, output current, and junction temperature. Keep the input voltage within the recommended range, and ensure the output current does not exceed the maximum rating. Also, provide adequate heat sinking to keep the junction temperature below the maximum rating.
Exceeding the maximum ratings of the 2TPF330M6 can lead to reduced reliability, decreased performance, and even permanent damage to the IC. It can cause overheating, electrical overstress, and even catastrophic failure.
To troubleshoot issues with the 2TPF330M6, start by checking the input voltage, output voltage, and output current. Verify that the input voltage is within the recommended range, and the output current is within the maximum rating. Check for any signs of overheating, and ensure the PCB layout is correct.
The 2TPF330M6 is rated for operation up to 125°C. However, it's essential to ensure adequate heat sinking and thermal management to prevent overheating. Consult the datasheet for thermal resistance and junction-to-ambient thermal resistance values to determine the maximum allowable temperature rise.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
2TPF330M6 Overview
Use the download button to access the 2TPF330M6 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 2TPF3,
or try a keyword search, such as Tantalum Capacitors
