Bourns recommends a symmetrical PCB layout with the chip resistors placed close to the IC, and the input and output traces separated to minimize noise and crosstalk.
Use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder to the pads. Ensure the component is properly aligned and the solder flows smoothly to avoid cold joints or bridging.
The 3309P-1-102 is rated for operation from -40°C to 125°C, but it's recommended to derate the device for extended operation above 85°C to ensure reliability and performance.
Yes, the 3309P-1-102 is designed to withstand vibrations up to 10g and shocks up to 100g, but it's recommended to follow proper mounting and soldering techniques to ensure the device remains securely attached to the PCB.
Check the input voltage, output load, and PCB layout for any issues. Verify that the device is properly soldered and the input and output capacitors are correctly sized and placed. Consult the datasheet and application notes for troubleshooting guidelines.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
3309P-1-102 Overview
Use the download button to access the 3309P-1-102 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like 3309P,
or try a keyword search, such as Variable Resistors
