Rubycon recommends a star-point grounding layout to minimize noise and ensure stable operation. A minimum of 2oz copper thickness and a 1.6mm PCB thickness are also recommended.
To handle the high ripple current, ensure that the capacitor is connected to a low-ESR circuit, and consider adding a series resistor to reduce the ripple current. Additionally, use a sufficient heat sink to dissipate heat generated by the capacitor.
Rubycon provides a derating curve in their application notes, which shows the recommended voltage derating based on temperature. For example, at 85°C, the capacitor should be derated to 80% of its rated voltage.
Yes, the 50TXW1000MEFC10X60 is designed to withstand high vibrations. However, ensure that the capacitor is properly secured to the PCB using a suitable mounting method, such as screw terminals or a clamp, to prevent mechanical stress.
The expected lifespan of the 50TXW1000MEFC10X60 is approximately 10,000 hours at 85°C, with a failure rate of less than 1% per 1,000 hours. However, this can vary depending on the application and operating conditions.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
50TXW1000MEFC10X60 Overview
Use the download button to access the 50TXW1000MEFC10X60 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 50TXW,
or try a keyword search, such as Aluminum Electrolytic Capacitors
