Dialight recommends a PCB layout with a large copper area for heat dissipation, and a thermal via under the LED to reduce thermal resistance. A minimum of 1 oz copper thickness is recommended.
Use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point above 180°C. Avoid applying excessive force or pressure during soldering, and ensure the LED is handled by the epoxy body, not the leads.
The recommended drive current is 20mA, and the recommended voltage is 2.1V. Exceeding these values may reduce the LED's lifespan or cause overheating.
Use a high-brightness LED option, such as the 555-5401F-HB, which has a higher luminous intensity. Additionally, consider using a diffuser or lens to improve visibility, or increasing the viewing angle by adjusting the LED's mounting position.
Yes, the 555-5401F is sensitive to electrostatic discharge (ESD). Handle the LED with ESD-protective equipment, such as wrist straps or mats, and ensure the assembly process is ESD-controlled.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
555-5401F Overview
Use the download button to access the 555-5401F schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 555-5,
or try a keyword search, such as Visible LEDs
