625L3C040M00000 footprint, schematic symbol and 3D model by CTS

Symbol

PCB Footprints

3D Models

625L3C040M00000 Details

A symmetrical layout with a solid ground plane and minimal signal trace length is recommended. Keep the oscillator away from noise sources and ensure a low-impedance path to ground.
Ensure a clean power supply, add a 0.1uF decoupling capacitor near the VCC pin, and use a pull-up resistor (1kΩ-10kΩ) on the EN pin to prevent unwanted shutdown.
The frequency deviation is typically ±100 ppm over the operating temperature range (-40°C to 85°C). However, this may vary depending on the specific application and environmental conditions.
Yes, the 625L3C040M00000 is designed to operate in harsh environments. However, it's essential to ensure proper PCB mounting and secure the oscillator to prevent mechanical stress.
The output drive strength is typically 15 pF CMOS, but it's recommended to check the specific requirements of your application and adjust the drive strength accordingly.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the 625L3C040M00000 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like 625L3, or try a keyword search, such as XO

If you searched for 625L3C040M00000, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →