Panasonic recommends a 4-layer PCB with a solid ground plane and a separate power plane for the input and output. The input and output capacitors should be placed as close as possible to the pins, and the PCB should be designed to minimize parasitic inductance and capacitance.
To ensure reliable operation over the full temperature range, it is recommended to follow proper thermal design and management practices, such as providing adequate heat sinking, using thermal interface materials, and avoiding thermal hotspots. Additionally, the device should be operated within the specified voltage and current ratings.
Panasonic recommends using low-ESR capacitors with a capacitance value of 10uF to 22uF for the input and output. The capacitor should be rated for the maximum operating voltage and should have a low equivalent series resistance (ESR) to minimize energy losses.
To protect the device from overvoltage and overcurrent, it is recommended to use a voltage regulator or a surge protector at the input, and to add overcurrent protection such as a fuse or a current limiter at the output. Additionally, the device should be operated within the specified voltage and current ratings.
Panasonic recommends a soldering temperature of 260°C to 280°C and a soldering time of 3 seconds to 5 seconds. The device should be soldered using a soldering iron with a temperature-controlled tip, and the soldering process should be done in a well-ventilated area.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
6SVPA220MAA Overview
Use the download button to access the 6SVPA220MAA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 6SVPA,
or try a keyword search, such as Ceramic Capacitors
