Description:The 7134 is a high-speed 4K x 8 Dual-Port Static RAM designed to be used in systems where on-chip hardware port arbitration is not needed. This part lends itself to those systems which cannot tolerate wait states or are designed to be able to externally arbitrate or withstand contention when both sides simultaneously access the same Dual-Port RAM location. An automatic power down feature, controlled by CE, permits the on-chip circuitry of each port to enter a very low standby power mode. Military grade prod
Renesas provides a recommended PCB layout guide in their application note (APL-AN-1143) which includes thermal design considerations, such as thermal vias, copper pours, and component placement, to ensure optimal thermal performance.
The 7134SA55JG has an internal overcurrent protection (OCP) feature, but it's recommended to add an external OCP circuit to ensure reliable operation. A simple OCP circuit can be implemented using a sense resistor, an op-amp, and a comparator to detect overcurrent conditions and shut down the device.
The recommended input capacitor selection depends on the input voltage, output current, and operating frequency. A general guideline is to use a low-ESR capacitor with a value between 10uF to 22uF, and a voltage rating of at least 1.5 times the input voltage. Renesas also provides a capacitor selection guide in their application note (APL-AN-1143).
To ensure EMC compliance, follow Renesas' guidelines for PCB layout, component selection, and shielding. Use a metal shield or a shielded inductor to reduce electromagnetic radiation, and ensure that the device is placed at least 1mm away from the PCB edge. Additionally, use a common-mode choke and a filter capacitor to reduce electromagnetic interference.
Renesas recommends using a thermal interface material (TIM) with a thermal conductivity of at least 1.5 W/m-K to ensure optimal thermal performance. Some examples of suitable TIMs include thermal grease, thermal tape, or thermal pads.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
7134SA55JG Overview
Use the download button to access the 7134SA55JG schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like 7134S,
or try a keyword search, such as SRAMs
