A symmetrical layout with a solid ground plane and minimal signal trace length is recommended. Keep the input and output traces separate and avoid crossing them.
Use a thermal interface material (TIM) between the device and the heat sink, and ensure good airflow around the device. Also, follow the recommended derating curves for temperature and output power.
Use low-ESR capacitors with a voltage rating of at least 1.5 times the input voltage. For the output, use capacitors with a voltage rating of at least 1.5 times the output voltage. Consult the datasheet for specific capacitor values and types.
Use a fuse or a current-limiting resistor in series with the input, and consider adding overvoltage protection (OVP) and undervoltage protection (UVP) circuits. Consult the datasheet for specific recommendations.
The recommended input voltage range is 10.5V to 15V, but the device can operate from 9V to 18V. However, the output power and efficiency may vary outside the recommended range.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
719W-00/02 Overview
Use the download button to access the 719W-00/02 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like 719W-,
or try a keyword search, such as Mains Power Connectors
