The recommended operating voltage range for the 74LCX86FT is 2.3V to 3.6V, although it can operate as low as 1.65V with reduced performance.
When the input pins are not in use, they should be tied to a valid logic level (either VCC or GND) to prevent them from floating and causing unwanted power consumption or noise.
The maximum frequency of operation for the 74LCX86FT is typically around 100 MHz, although this can vary depending on the specific application and operating conditions.
To ensure proper power supply, the 74LCX86FT should be powered from a clean, low-noise power source with a decoupling capacitor (typically 0.1uF) placed close to the VCC pin.
While the 74LCX86FT is designed for low-voltage operation, it can be used in a 5V system with proper level shifting or voltage translation, but this may require additional circuitry and is not recommended without careful consideration.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
74LCX86FT Overview
Use the download button to access the 74LCX86FT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 74LCX,
or try a keyword search, such as Gates