8NE-20.000MBM-T footprint, schematic symbol and 3D model by TXC CORPORATION

Symbol

PCB Footprints

3D Models

8NE-20.000MBM-T Details

TXC recommends a symmetrical PCB layout with a ground plane underneath the oscillator to minimize noise and electromagnetic interference. A minimum of 10mm clearance around the device is also recommended.
While the datasheet specifies an operating temperature range of -40°C to 85°C, TXC recommends derating the frequency tolerance by 0.05% per °C above 70°C to ensure reliable operation in high-temperature environments.
TXC recommends using a 10nF to 100nF decoupling capacitor between the VCC pin and GND pin to filter out noise and ensure stable operation.
Yes, the 8NE-20.000MBM-T is designed to meet EMI requirements for most applications. However, additional EMI filtering may be necessary depending on the specific application and regulatory requirements.
The typical start-up time for the 8NE-20.000MBM-T is around 2-5ms, but this can vary depending on the specific application and power supply conditions.

Expert Contribution

System Verified

Community Approved

Use the download button to access the 8NE-20.000MBM-T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like 8NE-2, or try a keyword search, such as XO

If you searched for 8NE-20.000MBM-T, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →