Altech recommends a 4-layer PCB with a solid ground plane and a separate power plane to minimize noise and ensure signal integrity. A minimum of 1 oz copper thickness is recommended for the power plane.
To ensure reliable operation in high-temperature environments, Altech recommends using a heat sink with a thermal resistance of 10°C/W or lower, and ensuring good airflow around the device. Additionally, the device should be operated within the specified temperature range of -40°C to 85°C.
Altech recommends a soldering profile with a peak temperature of 260°C, a dwell time of 30-60 seconds, and a ramp rate of 3°C/second. It's also important to use a solder with a melting point of 217°C or higher.
To troubleshoot issues with the device not turning on, check the power supply voltage, ensure that the enable pin is properly biased, and verify that the input voltage is within the specified range. Also, check for any short circuits or damage to the device or PCB.
Altech recommends using a 10uF to 22uF ceramic capacitor with an X7R or X5R dielectric, and a voltage rating of 16V or higher. The capacitor should be placed as close to the device as possible to minimize noise and ensure stable operation.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
972356101 Overview
Use the download button to access the 972356101 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like 97235,
or try a keyword search, such as Other Interconnects
