A good PCB layout for the A1190LUA-T involves keeping the sense lines as short as possible, using a ground plane, and minimizing noise coupling. Allegro provides a recommended PCB layout in their application note AN296070, which can be found on their website.
Calibration of the A1190LUA-T involves adjusting the zero-current output voltage (VZERO) and the sensitivity (mV/A) to match the specific application requirements. Allegro provides a calibration procedure in their application note AN296070, which includes a step-by-step guide and calculation examples.
Although the datasheet specifies a recommended VCC range of 3.3 V to 5 V, the absolute maximum rating for the VCC pin is 6.5 V. However, operating the device at voltages above 5 V may affect its performance and reliability.
The A1190LUA-T is rated for operation up to 150°C, but its accuracy and linearity may degrade at high temperatures. Allegro recommends using the device within the specified operating temperature range (–40°C to 150°C) for optimal performance. If high-temperature operation is required, consult Allegro's application note AN296070 for guidance on thermal management and compensation techniques.
To protect the A1190LUA-T from EMI, use proper shielding, grounding, and layout techniques. Allegro recommends using a shielded cable for the sense lines, keeping the sense lines away from noise sources, and using a common-mode filter or ferrite bead to reduce EMI. Additionally, ensure that the PCB layout follows good EMI design practices.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
A1190LUA-T Overview
Use the download button to access the A1190LUA-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A1190,
or try a keyword search, such as Magnetic Field Sensors
