Please enter a minimum 3 letters or numbers
Technical Content
Part Image

A1684LUBTN-T - Allegro Microsystems

Description: 2-Wire, Zero Speed Differential Sensor W/Integ Cap

Download A1684LUBTN-T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
A1684LUBTN-T - Allegro Microsystems - PCB symbol
click to zoom
PCB Footprints
A1684LUBTN-T - Allegro Microsystems PCB footprint - Other - Other - UB, 2-Pin SIP
click to zoom
3D Models
A1684LUBTN-T - Allegro Microsystems - 3D model - Other - UB, 2-Pin SIP
click to zoom

A1684LUBTN-T Details

  • Manufacturer Part Number:

    A1684LUBTN-T

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SIP-2

  • Date Of Intro:

    2016-03-01

  • Manufacturer:

    Allegro MicroSystems LLC

  • YTEOL:

    6

  • Body Breadth:

    1.5 mm

  • Body Height:

    4 mm

  • Body Length or Diameter:

    4 mm

  • Housing:

    PLASTIC

  • Mounting Feature:

    THROUGH HOLE MOUNT

  • Number of Terminals:

    2

  • Operating Current-Max:

    16 mA

  • Operating Temperature-Max:

    150 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Interface Type:

    2-WIRE INTERFACE

  • Output Type:

    DIGITAL OUTPUT

  • Package Shape/Style:

    RECTANGULAR

  • Screening Level:

    AEC-Q100

  • Sensors/Transducers Type:

    MAGNETIC FIELD SENSOR,HALL EFFECT

  • Supply Voltage-Max:

    24 V

  • Supply Voltage-Min:

    4 V

  • Surface Mount:

    NO

  • Technology:

    BICMOS

  • Termination Type:

    SOLDER

A1684LUBTN-T Frequently Asked Questions (FAQs)

  • A good PCB layout for the A1684LUBTN-T should minimize noise and ensure good thermal dissipation. Allegro recommends a 4-layer PCB with a solid ground plane, and placing the device near the center of the board to reduce noise. Additionally, ensure that the device is oriented to allow for good airflow.
  • The A1684LUBTN-T has a built-in thermal shutdown feature that turns off the device when it overheats. To handle this, ensure good airflow around the device, and consider adding a thermal interface material (TIM) to improve heat transfer. If the device shuts down, allow it to cool before restarting.
  • Allegro recommends a 10uF to 22uF ceramic capacitor with X7R or X5R dielectric for the VCC pin to filter out noise and ensure stable operation.
  • To configure the A1684LUBTN-T for low-power mode, set the EN pin low and ensure that the VIN pin is within the recommended voltage range. This will reduce the device's power consumption to a minimum.
  • The maximum allowable voltage on the VIN pin is 40V, but Allegro recommends operating the device within the recommended voltage range of 5.5V to 28V for optimal performance and reliability.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

A1684LUBTN-T Overview

Use the download button to access the A1684LUBTN-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A1684, or try a keyword search, such as Magnetic Field Sensors

Parts related to A1684LUBTN-T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑