A good PCB layout for the A6260SLJTR-T involves keeping the high-current paths short and wide, using a solid ground plane, and placing the device close to the battery. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure proper thermal management, it's recommended to attach a heat sink to the device, use a thermal interface material, and ensure good airflow around the device. The device's thermal pad should be connected to a solid ground plane to help dissipate heat.
The recommended input capacitor is a 10uF ceramic capacitor with X5R or X7R dielectric, and the recommended output capacitor is a 22uF ceramic capacitor with X5R or X7R dielectric. The capacitors should be placed close to the device and connected to the correct pins.
The A6260SLJTR-T has a built-in low-battery voltage detection feature. To configure it, connect the VBATT pin to the battery voltage, and the device will automatically detect when the battery voltage falls below the threshold voltage (typically 2.5V). The device will then pull the RST pin low to indicate a low-battery condition.
The recommended fuse rating for the A6260SLJTR-T is 5A to 10A, depending on the application's current requirements. The fuse should be placed in series with the input power supply to protect the device from overcurrent conditions.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
A6260SLJTR-T Overview
Use the download button to access the A6260SLJTR-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like A6260,
or try a keyword search, such as Display Drivers
