A6261KLJTR-T-1 footprint, schematic symbol and 3D model by Allegro Microsystems

Symbol

PCB Footprints

3D Models

A6261KLJTR-T-1 Details

Allegro recommends a 4-layer PCB with a solid ground plane, and to keep the sense lines as short as possible. Additionally, it's recommended to use a common mode filter and to decouple the power supply with a 10uF capacitor.
When the device is in sleep mode, the output signal is in a high-impedance state. It's recommended to use a pull-down resistor or a buffer to ensure a stable output signal.
Although the datasheet specifies a maximum VCC of 5.5V, Allegro recommends not exceeding 5V to ensure reliable operation and to prevent damage to the device.
Allegro recommends a two-point calibration method, where the device is calibrated at two different temperatures (e.g., 25°C and 125°C) to account for temperature drift. The calibration process involves adjusting the offset and gain registers to achieve optimal accuracy.
Although the datasheet specifies an operating temperature range of -40°C to 150°C, Allegro recommends operating the device within a range of -20°C to 125°C for optimal performance and reliability.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the A6261KLJTR-T-1 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like A6261, or try a keyword search, such as Display Drivers

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →