ABL-14.7456MHZ-B2 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ABL-14.7456MHZ-B2 Details

Abracon recommends a soldering temperature profile with a peak temperature of 260°C (500°F) for a maximum of 10 seconds. It's essential to follow the recommended soldering profile to prevent damage to the crystal oscillator.
To ensure reliable startup, Abracon recommends a power-up ramp time of 1 ms or slower, and a power supply voltage of 1.8V to 3.3V. Additionally, ensure the oscillator is properly decoupled with a 0.01 μF capacitor between VCC and GND.
The ABL-14.7456MHZ-B2 is rated for operation from -40°C to +85°C. However, it's essential to note that the oscillator's frequency stability and accuracy may degrade at extreme temperatures.
The ABL-14.7456MHZ-B2 is a fixed-frequency oscillator, and its frequency cannot be adjusted. If you need a different frequency, you'll need to select a different part number or consider using a programmable oscillator.
The typical current consumption of the ABL-14.7456MHZ-B2 is around 10 mA, but this can vary depending on the specific application and operating conditions. Be sure to check the datasheet for more information on power consumption.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ABL-14.7456MHZ-B2 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ABL-1, or try a keyword search, such as Quartz Crystals

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →