ABL-8.000MHZ-D2Y footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ABL-8.000MHZ-D2Y Details

Abracon recommends a layout with a ground plane underneath the oscillator, and to keep the traces as short as possible to minimize parasitic inductance and capacitance. A 4-layer PCB with a dedicated ground layer is also recommended.
The ABL-8.000MHZ-D2Y is rated for operation up to 85°C, but its frequency stability may degrade at higher temperatures. Abracon recommends derating the oscillator's frequency tolerance by 5 ppm/°C above 70°C.
Yes, the ABL-8.000MHZ-D2Y is designed to minimize EMI emissions. Abracon recommends using a shielded enclosure and following good PCB design practices to further reduce EMI.
Abracon recommends a drive level of 1-10 μW to ensure reliable operation and minimize power consumption.
The ABL-8.000MHZ-D2Y oscillator is designed to exhibit minimal aging effects, with a frequency drift of less than 5 ppm over 10 years at 25°C.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ABL-8.000MHZ-D2Y schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ABL-8, or try a keyword search, such as Quartz Crystals

Showing 0 results

Image	Part Number	Model
	ABL-08.0000MHZ-D-2-Y-T Abracon Corporation Parallel - Fundamental Quartz Crystal, 8MHz Nom, HC/49US, 2 PIN
	ABL-08.0000MHZ-N-2-Y-TRAY Abracon Corporation Parallel - Fundamental Quartz Crystal, 8MHz Nom, HC/49US, 2 PIN
	ABL-08.0000MHZ-B-2-Y-TRAY Abracon Corporation Parallel - Fundamental Quartz Crystal, 8MHz Nom, HC/49US, 2 PIN
	ABL-08.0000MHZ-B-2-Y-T Abracon Corporation Parallel - Fundamental Quartz Crystal, 8MHz Nom, HC/49US, 2 PIN
	ABL-08.0000MHZ-A-2-Y-P Abracon Corporation Parallel - Fundamental Quartz Crystal, 8MHz Nom
For a full list of alternate parts for ABL-8.000MHZ-D2Y, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →