ABLJO-V-80.000MHZ footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ABLJO-V-80.000MHZ Details

Abracon recommends following a 4-layer PCB stack-up with a dedicated ground plane, and using a 50-ohm microstrip transmission line to connect the oscillator to the load. Additionally, keep the PCB layout as symmetrical as possible to minimize radiation and noise.
The ABLJO-V-80.000MHZ is rated for operation up to 85°C, but its frequency stability may degrade at higher temperatures. Abracon recommends derating the frequency tolerance by 5 ppm/°C above 70°C. For extreme temperature applications, consider using a more temperature-stable oscillator or consulting with Abracon's application engineers.
Yes, the ABLJO-V-80.000MHZ can be used in redundant or backup systems. However, ensure that the oscillator is properly synchronized and phase-aligned with the primary clock source to prevent frequency conflicts or system instability.
Abracon recommends powering up the VCC pin before applying an enable signal (if applicable). This ensures proper internal biasing and minimizes the risk of damage or malfunction.
The ABLJO-V-80.000MHZ is designed to operate with a power supply voltage range of 1.8V to 3.3V. However, it's recommended to use a low-noise power supply and decoupling capacitors to minimize the impact of power supply noise and voltage variations on the oscillator's performance.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ABLJO-V-80.000MHZ schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ABLJO, or try a keyword search, such as VCXO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →