Abracon recommends a ground plane underneath the oscillator, with a minimum of 2mm clearance around the device. Additionally, the output pin should be routed to the load with a 50Ω transmission line, and the input pin should be connected to a 10nF capacitor to ground.
The ABLNO-80.000MHZ is rated for operation up to 85°C, but its frequency stability may degrade above 70°C. Abracon recommends derating the frequency tolerance by 5ppm/°C above 70°C.
Yes, the ABLNO-80.000MHZ can be used in a system with multiple power domains, but it's essential to ensure that the oscillator is powered from a clean, low-noise power supply. Additionally, the output signal should be isolated from other power domains using a buffer or isolation circuitry.
The ABLNO-80.000MHZ output is designed to drive a 15pF load. Abracon recommends using a buffer or repeater if the load capacitance exceeds 15pF or if the output signal needs to be driven over a long distance.
The ABLNO-80.000MHZ is designed to be resistant to EMI and RFI, but it's still important to follow proper PCB layout and shielding practices to minimize the impact of external interference. Abracon recommends using a shielded enclosure and keeping the oscillator away from high-frequency sources.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ABLNO-80.000MHZ Overview
Use the download button to access the ABLNO-80.000MHZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ABLNO,
or try a keyword search, such as XO
