ABM8AIG-20.000MHz-4-T - ABRACON

ABM8AIG-20.000MHz-4-T Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  Abracon recommends a symmetrical PCB layout with a solid ground plane, and keeping the oscillator away from high-frequency noise sources. A minimum of 2-layer PCB is recommended, with the oscillator on the top layer and the ground plane on the bottom layer.
• How do I ensure the oscillator starts up reliably in my design?
  To ensure reliable startup, Abracon recommends a power-up ramp time of 1ms to 10ms, and a power supply voltage of 1.8V to 3.3V. Additionally, the oscillator should be decoupled with a 0.01uF to 0.1uF capacitor between VCC and GND.
• What is the operating temperature range for this oscillator?
  The ABM8AIG-20.000MHZ-4-T has an operating temperature range of -40°C to +85°C, making it suitable for most commercial and industrial applications.
• Is this oscillator suitable for high-reliability applications?
  Yes, the ABM8AIG-20.000MHZ-4-T is designed for high-reliability applications and is built with a ruggedized design to withstand environmental stresses. It is also available in a variety of package options, including a hermetically sealed ceramic package for extreme environments.
• Can I use this oscillator in a design that requires low EMI?
  Yes, the ABM8AIG-20.000MHZ-4-T is designed to minimize EMI and has a low radiation pattern. Abracon recommends following good PCB design practices, such as using a solid ground plane and keeping the oscillator away from high-frequency noise sources, to further reduce EMI.