Abracon recommends following a 4-layer PCB stack-up with a solid ground plane on the bottom layer, and using a microstrip or stripline configuration for the RF signal traces. Additionally, keeping the RF signal traces as short as possible and using 50Ω impedance matching is recommended.
Abracon recommends following the recommended soldering profile, using a nitrogen atmosphere, and ensuring the PCB is clean and dry before soldering. Avoiding excessive heat, using a solder with a low melting point, and minimizing the number of reflow cycles can also help prevent damage.
The ACAR4008-S698 is rated for operation from -40°C to +85°C, but Abracon recommends derating the device's performance at temperatures above 70°C to ensure reliable operation.
While the ACAR4008-S698 is designed to operate in a variety of environments, Abracon recommends taking precautions to prevent moisture ingress, such as using a conformal coating or potting the device. Operating the device in extremely humid or high-moisture environments may affect its reliability and performance.
Abracon recommends storing the ACAR4008-S698 in its original packaging, in a dry, cool place, away from direct sunlight and moisture. Handling the device by the edges or using an anti-static wrist strap can help prevent ESD damage.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ACAR4008-S698 Overview
Use the download button to access the ACAR4008-S698 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ACAR4,
or try a keyword search, such as RF/Microwave Antennas
