ACH-3.6864MHZ-EK footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ACH-3.6864MHZ-EK Details

Abracon recommends a symmetrical PCB layout with a ground plane underneath the oscillator, and keeping the traces as short as possible to minimize noise and radiation. A 4-layer PCB with a dedicated ground plane is ideal.
To ensure reliable startup, Abracon recommends applying a power-on reset to the oscillator, and using a capacitor with a value between 10nF to 22nF between the VCC and GND pins to filter out noise and voltage spikes.
The ACH-3.6864MHZ-EK oscillator is rated for operation from -40°C to +85°C, but Abracon recommends derating the frequency tolerance by 5ppm/°C for temperatures above 70°C.
No, the ACH-3.6864MHZ-EK oscillator is a fixed-frequency device and cannot be adjusted to operate at a different frequency. Abracon offers a range of oscillators with different frequencies, so it's best to select the one that meets your design requirements.
The typical current consumption of the ACH-3.6864MHZ-EK oscillator is around 10mA, but this can vary depending on the specific application and operating conditions. Abracon recommends consulting the datasheet for more information.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ACH-3.6864MHZ-EK schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ACH-3, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →