ACH-40.000MHZ-EK footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ACH-40.000MHZ-EK Details

Abracon recommends a layout with a ground plane underneath the oscillator, and keeping the traces as short as possible to minimize parasitic inductance and capacitance. A 4-layer PCB with a dedicated ground plane is ideal.
To ensure reliable startup, Abracon recommends a power-up ramp time of at least 1ms, and a power supply voltage that reaches the specified operating voltage (1.8V to 3.3V) within 100ms. Additionally, a 10nF to 100nF decoupling capacitor should be placed close to the oscillator.
The ACH-40.000MHZ-EK oscillator is rated for operation from -40°C to +85°C. However, Abracon recommends derating the frequency tolerance by ±10ppm for every 10°C above 70°C to ensure reliable operation.
No, the ACH-40.000MHZ-EK oscillator is a fixed-frequency device and cannot be adjusted to operate at a different frequency. If a different frequency is required, Abracon offers a range of oscillators with different frequencies, or a custom oscillator can be designed.
The typical current consumption of the ACH-40.000MHZ-EK oscillator is around 10mA to 20mA, depending on the specific application and operating conditions. Abracon recommends consulting the datasheet for more detailed information.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ACH-40.000MHZ-EK schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ACH-4, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →