ACHL-11.0592MHZ-EK footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ACHL-11.0592MHZ-EK Details

Abracon recommends a symmetrical PCB layout with a ground plane underneath the oscillator, and keeping the oscillator away from high-frequency signals and noise sources. A 4-layer PCB with a dedicated ground plane is ideal.
To ensure reliable startup, Abracon recommends a power-up ramp time of at least 1ms, and a power supply voltage of 1.8V to 3.3V. Additionally, the oscillator should be decoupled from the power supply with a 10nF to 100nF capacitor.
The ACHL-11.0592MHZ-EK oscillator is rated for operation from -40°C to +85°C, but Abracon recommends derating the frequency tolerance by 5ppm/°C for temperatures above 70°C.
No, the ACHL-11.0592MHZ-EK oscillator is a fixed-frequency device and cannot be adjusted to operate at a different frequency. Abracon offers a range of frequencies in their ACHL series, so it's recommended to select the correct frequency device for your design.
The typical current consumption of the ACHL-11.0592MHZ-EK oscillator is around 10mA to 20mA, depending on the load capacitance and operating voltage. Abracon recommends consulting the datasheet for specific current consumption values.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ACHL-11.0592MHZ-EK schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ACHL-, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →