ACHL-4.000MHZ-EK footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ACHL-4.000MHZ-EK Details

Abracon recommends a layout with a ground plane underneath the oscillator, and to keep the traces as short as possible to minimize parasitic inductance and capacitance. A 4-layer PCB with a dedicated ground layer is also recommended.
To ensure reliable startup, Abracon recommends a power-up ramp time of at least 1ms, and a power supply voltage that is within the recommended operating range. Additionally, the oscillator should be decoupled from the power supply with a 10nF to 100nF capacitor.
The ACHL-4.000MHZ-EK oscillator is rated for operation from -40°C to +85°C, but Abracon recommends derating the frequency tolerance by 5ppm/°C for temperatures above 70°C.
No, the ACHL-4.000MHZ-EK oscillator is a fixed-frequency device and cannot be adjusted to operate at a different frequency. If a different frequency is required, a different part number should be selected.
The typical current consumption of the ACHL-4.000MHZ-EK oscillator is around 10mA to 20mA, depending on the load capacitance and operating conditions. However, this value can vary depending on the specific application and should be verified through testing.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ACHL-4.000MHZ-EK schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ACHL-, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →