ACO-16.000MHZ-EK footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

ACO-16.000MHZ-EK Details

Abracon recommends a symmetrical PCB layout with a ground plane underneath the oscillator, and keeping the traces as short as possible to minimize signal degradation and noise coupling.
To ensure reliable startup, Abracon recommends applying a power-on reset to the oscillator, and ensuring that the power supply voltage is stable and within the recommended operating range before enabling the oscillator.
The ACO-16.000MHZ-EK oscillator is rated for operation from -40°C to +85°C, but Abracon recommends derating the frequency tolerance and stability over the full temperature range to ensure reliable operation.
No, the ACO-16.000MHZ-EK oscillator is a fixed-frequency device and cannot be adjusted to operate at a different frequency. Abracon offers a range of oscillator frequencies, so it's best to select the correct frequency device for your design.
Abracon recommends a drive level of 1-10 μW to ensure reliable operation and minimize power consumption. Excessive drive levels can lead to oscillator damage or reduced lifespan.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ACO-16.000MHZ-EK schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ACO-1, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →