Allegro provides a recommended PCB layout in their application note AN269, which includes guidelines for trace routing, component placement, and thermal management to ensure optimal performance and accuracy.
Calibration is not typically required for the ACS773LCB-100B-SMT-T, as it is a pre-calibrated device. However, if you need to adjust the offset or gain, Allegro provides a calibration procedure in their application note AN264.
The ACS773LCB-100B-SMT-T has an operating temperature range of -40°C to 150°C, but it's recommended to operate within -20°C to 85°C for optimal performance and accuracy.
Allegro recommends following proper EMI design practices, such as using a shielded enclosure, keeping the device away from high-frequency sources, and using a low-pass filter on the output signals. Additionally, the ACS773LCB-100B-SMT-T has built-in EMI filtering and is designed to meet CISPR 25 and SAE J1113-4 standards.
The typical response time of the ACS773LCB-100B-SMT-T is 10 μs, but it can vary depending on the specific application and operating conditions. Allegro provides more detailed information on response time in their application note AN265.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ACS773LCB-100B-SMT-T Overview
Use the download button to access the ACS773LCB-100B-SMT-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ACS77,
or try a keyword search, such as Other Sensors/Transducers
