Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AD4858BBCZ - Analog Devices

Description: ADI

Download AD4858BBCZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AD4858BBCZ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
AD4858BBCZ - Analog Devices PCB footprint - BGA - BGA - AD4858BBCZ
click to zoom
3D Models
AD4858BBCZ - Analog Devices - 3D model - BGA - AD4858BBCZ
click to zoom

AD4858BBCZ Details

  • Manufacturer Part Number:

    AD4858BBCZ

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    CHIP SCALE BGA

  • Package Description:

    BGA-64

  • Pin Count:

    64

  • Manufacturer Package Code:

    CHIP SCALE BGA

  • HTS Code:

    8542.39.00.30

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Analog Input Voltage-Max:

    41.21 V

  • Analog Input Voltage-Min:

    -40.71 V

  • Conversion Time-Max:

    0.725 µs

  • Converter Type:

    DATA ACQUISITION DEVICE

  • JESD-30 Code:

    S-PBGA-B64

  • Length:

    7 mm

  • Negative Supply Voltage-Nom:

    -3.2 V

  • Number of Analog In Channels:

    8

  • Number of Bits:

    20

  • Number of Functions:

    1

  • Number of Terminals:

    64

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Bit Code:

    2'S COMPLEMENT BINARY

  • Output Format:

    SERIAL

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LFBGA

  • Package Equivalence Code:

    BGA64,8X8,32

  • Package Shape:

    SQUARE

  • Package Style:

    GRID ARRAY, LOW PROFILE, FINE PITCH

  • Sample Rate:

    1 MHz

  • Sample and Hold / Track and Hold:

    TRACK

  • Seated Height-Max:

    1.61 mm

  • Supply Current-Max:

    19.6 mA

  • Supply Voltage-Nom:

    8.2 V

  • Surface Mount:

    YES

  • Terminal Form:

    BALL

  • Terminal Pitch:

    0.8 mm

  • Terminal Position:

    BOTTOM

  • Width:

    7 mm

AD4858BBCZ Frequently Asked Questions (FAQs)

  • A good layout and routing practice is to keep the analog and digital grounds separate, use a solid ground plane, and keep the signal traces short and away from the digital lines. Additionally, use a common-mode choke or ferrite bead to filter out high-frequency noise.
  • Use a high-quality, low-ESR capacitor (e.g., 10uF ceramic) for power supply decoupling, and place it as close as possible to the device. Ensure the power supply rails are well-regulated and filtered, and use a separate analog and digital power supply if possible.
  • The AD4858BBCZ can support data rates up to 400 Mbps, but the actual achievable data rate depends on the specific application, PCB layout, and signal integrity. It's recommended to consult the datasheet and application notes for more information.
  • The AD4858BBCZ can be configured for half-duplex or full-duplex operation by setting the appropriate control pins (e.g., TXEN, RXEN, and DIR). Consult the datasheet and application notes for specific configuration details.
  • The recommended termination scheme for the AD4858BBCZ is a 100-ohm differential termination resistor at the receiver end, and a 50-ohm series termination resistor at the transmitter end. However, the specific termination scheme may vary depending on the application and cable length.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD4858BBCZ Overview

Use the download button to access the AD4858BBCZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD485, or try a keyword search, such as Analog to Digital Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD4858BBCZ

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑