Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AD7467BRTZ-R2 - Analog Devices

Description: Analog Devices AD7467BRTZ-R2, 10 bit Serial ADC,, 6-Pin SOT-23

Download AD7467BRTZ-R2 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AD7467BRTZ-R2 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
AD7467BRTZ-R2 - Analog Devices PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - 6-Lead SOT-23-ren1
click to zoom
3D Models
AD7467BRTZ-R2 - Analog Devices - 3D model - SOT23 (6-Pin) - 6-Lead SOT-23-ren1
click to zoom

AD7467BRTZ-R2 Details

  • Manufacturer Part Number:

    AD7467BRTZ-R2

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    SOT-23, 6 PIN

  • Pin Count:

    6

  • HTS Code:

    8542.39.00.30

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Analog Input Voltage-Max:

    3.6 V

  • Conversion Time-Max:

    4.7 µs

  • Converter Type:

    ADC, SUCCESSIVE APPROXIMATION

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e3

  • Length:

    2.9 mm

  • Linearity Error-Max (EL):

    0.0488%

  • Moisture Sensitivity Level:

    1

  • Number of Analog In Channels:

    1

  • Number of Bits:

    10

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Bit Code:

    BINARY

  • Output Format:

    PARALLEL, WORD

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Sample Rate:

    0.1 MHz

  • Sample and Hold / Track and Hold:

    TRACK

  • Seated Height-Max:

    1.45 mm

  • Supply Current-Max:

    0.19 mA

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Width:

    1.6 mm

AD7467BRTZ-R2 Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD7467BRTZ-R2 involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, it's recommended to use a 4-layer PCB with a dedicated analog power plane and a dedicated digital power plane.
  • To ensure proper calibration, follow the calibration procedure outlined in the datasheet, which involves applying a known temperature to the device and adjusting the offset and gain registers accordingly. It's also important to ensure that the device is in a stable thermal environment during calibration.
  • The maximum cable length for the AD7467BRTZ-R2's digital interface is typically limited by the capacitance of the cable and the signal frequency. As a general guideline, a cable length of up to 10 meters is recommended. The cable should be a shielded, twisted-pair cable with a characteristic impedance of 100 ohms and a capacitance of less than 50 pF/ft.
  • The AD7467BRTZ-R2 has a power-on reset (POR) circuit that resets the device when the power supply voltage is below a certain threshold. To handle the POR, ensure that the power supply voltage is stable and within the recommended range before attempting to access the device. Additionally, design your system to accommodate the POR by adding a delay or a reset signal to your microcontroller or processor.
  • The AD7467BRTZ-R2 is sensitive to thermal gradients and thermal noise. To ensure accurate temperature measurements, ensure good thermal coupling between the device and the thermal source, and minimize thermal gradients by using a thermally conductive material such as copper or aluminum. Additionally, consider using thermal shielding or insulation to reduce thermal noise.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD7467BRTZ-R2 Overview

Use the download button to access the AD7467BRTZ-R2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD746, or try a keyword search, such as Analog to Digital Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD7467BRTZ-R2

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

AD7467BRTZ-R2 Alternates

Showing results

Image Part Number Model
Part Image AD7467BRTZ-REEL Analog Devices Inc

ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDSO6