Part Image

AD7980ARMZ - Analog Devices

Description: High performance Pseudo differential analog input range 0 V to VREF with VREF between 2.5 V to 5 V Throughput: 1 MSPS Zero latency architecture 16-bit resolution with no missing codes INL: ±0.6 LSB typical, ±1.25 LSB maximum Dynamic range: 92 dB, VREF = 5 V SNR: 91.5 dB at fIN = 10 kHz, VREF = 5 V THD: −114 dB at fIN = 10 kHz, VREF = 5 V SINAD: 91 dB at fIN = 10 kHz, VREF = 5 V Low power dissipation Single-supply 2.5 V operation with 1.8 V/2.5 V/3 V/5 V logic interface 4 mW at 1 MSPS (VDD only

Download AD7980ARMZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD7980ARMZ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - (RM-10)
click to zoom
3D Models
AD7980ARMZ - Analog Devices  - 3D model - Small Outline Packages - (RM-10)
click to zoom

AD7980ARMZ Details

  • Manufacturer Part Number:

    AD7980ARMZ

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    TSSOP

  • Package Description:

    TSSOP-10

  • Pin Count:

    10

  • Manufacturer Package Code:

    RM-10

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Analog Input Voltage-Max:

    5.1 V

  • Conversion Time-Max:

    0.71 µs

  • Converter Type:

    ADC, SUCCESSIVE APPROXIMATION

  • JESD-30 Code:

    S-PDSO-G10

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Linearity Error-Max (EL):

    0.0038%

  • Moisture Sensitivity Level:

    1

  • Number of Analog In Channels:

    1

  • Number of Bits:

    16

  • Number of Functions:

    1

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Bit Code:

    BINARY

  • Output Format:

    SERIAL

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP10,.19,20

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Sample Rate:

    1 MHz

  • Sample and Hold / Track and Hold:

    TRACK

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max:

    2.5 mA

  • Supply Voltage-Nom:

    2.5 V

  • Surface Mount:

    YES

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3 mm

AD7980ARMZ Frequently Asked Questions (FAQs)

  • A good layout and routing practice is to keep the analog and digital grounds separate, use a solid ground plane, and keep the analog signal traces away from the digital signal traces. Additionally, use a low-ESR capacitor for the AVDD and DVDD pins, and keep the decoupling capacitors close to the pins.
  • The AD7980ARMZ has an internal calibration circuit that calibrates the ADC during power-up. However, it's recommended to perform an external calibration by writing a known voltage to the input and reading the corresponding digital output to determine the gain and offset errors. This can be done using an external microcontroller or FPGA.
  • The maximum sampling rate of the AD7980ARMZ is 1 MSPS. However, the power consumption increases with the sampling rate. At 1 MSPS, the typical power consumption is around 15 mW. To minimize power consumption, consider using a lower sampling rate or using the power-down mode when not converting.
  • The AD7980ARMZ outputs 16-bit data in a serial format. The output data is in twos complement format, with the most significant bit (MSB) first. The output data can be read using a serial interface, such as SPI or I2C, and can be processed using an external microcontroller or FPGA.
  • The recommended input voltage range for the AD7980ARMZ is 0 to VREF (typically 2.5V or 5V). The input voltage range affects the accuracy of the conversions, with the highest accuracy achieved when the input voltage is within 10% of the reference voltage. Operating outside this range may result in reduced accuracy and increased nonlinearity.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD7980ARMZ Overview

Use the download button to access the AD7980ARMZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD798, or try a keyword search, such as Analog to Digital Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD7980ARMZ

Showing 0 results

AD7980ARMZ Alternates

Showing results

Image Part Number Model
Part Image AD7980ARMZRL7 Analog Devices Inc

ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, PDSO10