Part Image

AD8001AQ - Analog Devices

Description: 800 MHz, 50 mW Current Feedback Amplifier

Download AD8001AQ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
AD8001AQ - Analog Devices PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - 8-Lead Ceramic Dip – Glass Hermetic Seal [CERDIP] (Q-8)-
click to zoom
3D Models
AD8001AQ - Analog Devices  - 3D model - Dual-In-Line Packages - 8-Lead Ceramic Dip – Glass Hermetic Seal [CERDIP] (Q-8)-
click to zoom

AD8001AQ Details

  • Manufacturer Part Number:

    AD8001AQ

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    DIP

  • Package Description:

    CERDIP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    Q-8

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    CURRENT-FEEDBACK

  • Bias Current-Max (IIB) @25C:

    25 µA

  • Common-mode Reject Ratio-Min:

    50 dB

  • Common-mode Reject Ratio-Nom:

    54 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    9000 µV

  • JESD-30 Code:

    R-GDIP-T8

  • JESD-609 Code:

    e0

  • Length:

    10.29 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Neg Supply Voltage Limit-Max:

    -6.3 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -55 °C

  • Package Body Material:

    CERAMIC, GLASS-SEALED

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP8,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    5.08 mm

  • Slew Rate-Min:

    800 V/us

  • Slew Rate-Nom:

    1000 V/us

  • Supply Current-Max:

    5.5 mA

  • Supply Voltage Limit-Max:

    6.3 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    NO

  • Technology:

    BIPOLAR

  • Temperature Grade:

    MILITARY

  • Terminal Finish:

    Tin/Lead (Sn/Pb)

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Wideband:

    YES

  • Width:

    7.62 mm

AD8001AQ Frequently Asked Questions (FAQs)

  • The maximum power dissipation of the AD8001AQ is 670mW, which is calculated based on the maximum junction temperature (TJ) of 150°C and the thermal resistance (θJA) of 125°C/W.
  • To ensure stability in a gain-of-10 configuration, use a compensation capacitor (CC) of 10pF to 22pF between pins 2 and 6, and a series resistor (RS) of 10Ω to 50Ω in the feedback path.
  • Use a star-grounding technique, where the analog and digital grounds are connected at a single point, and keep the analog and digital signal paths separate. Also, use a solid ground plane and avoid routing digital signals near the analog signal paths.
  • Yes, the AD8001AQ can be used in a single-supply configuration. However, the input common-mode voltage range is limited to VCC - 2V to VCC + 0.5V. Use a voltage divider or a voltage reference to set the input common-mode voltage.
  • Use a low-pass filter or a ferrite bead in the power supply lines, and keep the analog signal paths away from digital signal paths and noise sources. Also, use a shielded enclosure and consider using a common-mode choke or a ferrite core around the input cables.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD8001AQ Overview

Use the download button to access the AD8001AQ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD800, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD8001AQ

Showing 0 results

AD8001AQ Alternates

Showing results

Image Part Number Model
Part Image 5962-9559701MPA Analog Devices Inc

Operational Amplifier, 1 Func, 8000uV Offset-Max, Hybrid, CDIP8

Part Image 5962-9203401MPX Rochester Electronics LLC

Operational Amplifier, 1 Func, 4500uV Offset-Max, CDIP8

Part Image 5962R9459301VPA Analog Devices Inc

Operational Amplifier, 1 Func, 5500uV Offset-Max, BIPolar, CDIP8

Part Image 5962-9203401MPA Comlinear Corporation

Operational Amplifier, 1 Func, CDIP8

Part Image 5962-9200401MPC Texas Instruments

OP-AMP, CDIP8

For a full list of alternate parts for AD8001AQ, check out Findchips.com