Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AD9547BCPZ-REEL7 - Analog Devices

Description: Dual/Quad Input Network Clock Generator/Synchronizer

Download AD9547BCPZ-REEL7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AD9547BCPZ-REEL7 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
AD9547BCPZ-REEL7 - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - CP-64-4
click to zoom
3D Models
AD9547BCPZ-REEL7 - Analog Devices - 3D model - Quad Flat No-Lead - CP-64-4
click to zoom

AD9547BCPZ-REEL7 Details

  • Manufacturer Part Number:

    AD9547BCPZ-REEL7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFN

  • Package Description:

    9 X 9 MM, ROHS COMPLIANT, MO-220VMMD-4, LFCSP-64

  • Pin Count:

    64

  • Manufacturer Package Code:

    CP-64-4

  • Country Of Origin:

    Singapore

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • JESD-30 Code:

    S-XQCC-N64

  • JESD-609 Code:

    e3

  • Length:

    9 mm

  • Moisture Sensitivity Level:

    3

  • Number of Terminals:

    64

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Clock Frequency-Max:

    450 MHz

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Primary Clock/Crystal Frequency-Nom:

    1000 MHz

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1 mm

  • Supply Voltage-Max:

    1.89 V

  • Supply Voltage-Min:

    1.71 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    9 mm

  • uPs/uCs/Peripheral ICs Type:

    CLOCK GENERATOR, OTHER

AD9547BCPZ-REEL7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the AD9547BCPZ-REEL7 involves separating the analog and digital sections, using a solid ground plane, and keeping the clock input traces short and shielded. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a solid ground plane to minimize noise and ensure optimal performance.
  • To properly configure the AD9547BCPZ-REEL7 for use in a clock distribution application, you need to set the device in the 'bypass' mode, connect the input clock to the CLKIN pin, and configure the output clock frequency and format using the SPI interface. You should also ensure that the output clock is properly terminated and that the device is powered from a clean and stable power supply.
  • The AD9547BCPZ-REEL7 can handle clock frequencies up to 1.5 GHz, but the maximum frequency may vary depending on the specific application and the quality of the input clock signal. It's recommended to consult the datasheet and application notes for more information on clock frequency limitations.
  • To troubleshoot issues with the AD9547BCPZ-REEL7, start by checking the input clock signal quality and ensuring that it meets the device's input requirements. Then, verify that the device is properly configured and powered. Use an oscilloscope to check the output clock signal quality and verify that it meets the required specifications. If the issue persists, consult the datasheet and application notes for more troubleshooting guidance.
  • Yes, the AD9547BCPZ-REEL7 can be used in a redundant clocking system. To implement redundancy, you can use multiple AD9547BCPZ-REEL7 devices, each receiving the same input clock signal, and then use a clock selector or multiplexer to switch between the output clocks in case of a failure. This ensures that the system remains operational even if one of the clock sources fails.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AD9547BCPZ-REEL7 Overview

Use the download button to access the AD9547BCPZ-REEL7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AD954, or try a keyword search, such as Clock Generators

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AD9547BCPZ-REEL7

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑