Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADA4610-1ARJZ-R7 - Analog Devices

Description: J-FET Amplifier 1 Circuit Rail-to-Rail SOT-23-5

Download ADA4610-1ARJZ-R7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADA4610-1ARJZ-R7 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ADA4610-1ARJZ-R7 - Analog Devices PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - RJ-5
click to zoom
3D Models
ADA4610-1ARJZ-R7 - Analog Devices - 3D model - SOT23 (5-Pin) - RJ-5
click to zoom

ADA4610-1ARJZ-R7 Details

  • Manufacturer Part Number:

    ADA4610-1ARJZ-R7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOT-23, 5 PIN

  • Pin Count:

    5

  • Manufacturer Package Code:

    RJ-5

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.0015 µA

  • Bias Current-Max (IIB) @25C:

    0.000025 µA

  • Common-mode Reject Ratio-Min:

    86 dB

  • Common-mode Reject Ratio-Nom:

    110 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    1800 µV

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e3

  • Length:

    2.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP5/6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Seated Height-Max:

    1.45 mm

  • Slew Rate-Min:

    15 V/us

  • Slew Rate-Nom:

    21 V/us

  • Supply Current-Max:

    1.85 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    JFET

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    15400

  • Voltage Gain-Min:

    15848.93

  • Wideband:

    NO

  • Width:

    1.6 mm

ADA4610-1ARJZ-R7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the ADA4610-1ARJZ-R7 involves keeping the input and output traces short and away from noise sources, using a solid ground plane, and decoupling the power supply with capacitors. A 4-layer PCB with a dedicated analog ground plane is recommended.
  • The gain resistors for the ADA4610-1ARJZ-R7 should be chosen based on the desired gain and bandwidth. A higher gain requires smaller resistors, while a lower gain requires larger resistors. The resistor values also affect the noise figure and input impedance. A good starting point is to use 1 kΩ to 10 kΩ resistors and adjust based on the specific application.
  • The ADA4610-1ARJZ-R7 has a maximum junction temperature of 150°C. To ensure reliable operation, ensure good airflow, use a heat sink if necessary, and avoid high-power dissipation. The device is rated for operation from -40°C to 125°C, but the performance may vary with temperature. Consult the datasheet for thermal resistance and power dissipation guidelines.
  • To filter out noise and interference, use a combination of passive and active filtering techniques. Add capacitors to decouple the power supply, use a ferrite bead or common-mode choke to filter out high-frequency noise, and consider adding a low-pass filter at the input or output. Shielding and grounding the circuit board can also help reduce noise.
  • To ensure EMI and RFI compliance, follow proper PCB layout and design practices, use shielding and grounding, and add filtering components as needed. The ADA4610-1ARJZ-R7 is designed to meet CISPR 22 and FCC Part 15 Class B standards, but the final product must still meet regulatory requirements. Consult the datasheet and relevant standards for specific guidelines.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADA4610-1ARJZ-R7 Overview

Use the download button to access the ADA4610-1ARJZ-R7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADA46, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADA4610-1ARJZ-R7

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑