Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADA4860-1YRJZ-RL7 - Analog Devices

Description: ANALOG DEVICES - ADA4860-1YRJZ-RL7 - OP-AMP, SINGLE, 520MHZ, 980V/US, SOT23-6

Download ADA4860-1YRJZ-RL7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADA4860-1YRJZ-RL7 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ADA4860-1YRJZ-RL7 - Analog Devices PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - 6-Lead SOT-23-ren1
click to zoom
3D Models
ADA4860-1YRJZ-RL7 - Analog Devices - 3D model - SOT23 (6-Pin) - 6-Lead SOT-23-ren1
click to zoom

ADA4860-1YRJZ-RL7 Details

  • Manufacturer Part Number:

    ADA4860-1YRJZ-RL7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    SOT-23, 6 PIN

  • Pin Count:

    6

  • Manufacturer Package Code:

    RJ-6

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.25 µA

  • Common-mode Reject Ratio-Min:

    55 dB

  • Common-mode Reject Ratio-Nom:

    58 dB

  • Frequency Compensation:

    NO

  • Input Offset Voltage-Max:

    13000 µV

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e3

  • Length:

    2.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -6.3 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    YES

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.45 mm

  • Slew Rate-Nom:

    980 V/us

  • Supply Current-Max:

    8 mA

  • Supply Voltage Limit-Max:

    6.3 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Wideband:

    YES

  • Width:

    1.6 mm

ADA4860-1YRJZ-RL7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the ADA4860-1YRJZ-RL7 involves keeping the input and output traces short and separate, using a solid ground plane, and placing decoupling capacitors close to the device. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper biasing, make sure to connect the VCC pin to a stable voltage source, and the VEE pin to a stable negative voltage source or ground. The recommended bias voltage is between 2.7V and 5.5V. Also, ensure that the input common-mode voltage is within the recommended range of 1.2V to 3.5V.
  • The maximum power dissipation of the ADA4860-1YRJZ-RL7 is 1.3W. To prevent overheating, ensure good thermal conductivity by using a heat sink or a thermally conductive PCB material. Also, keep the device away from other heat sources and ensure good airflow around the device.
  • The choice of gain resistors depends on the desired gain and bandwidth. A good starting point is to use the recommended values in the datasheet. For a non-inverting amplifier, use Rf = Rg = 1kΩ for a gain of 1. For an inverting amplifier, use Rf = 1kΩ and Rg = 2kΩ for a gain of -1. Adjust the values based on your specific application requirements.
  • The ADA4860-1YRJZ-RL7 has built-in ESD protection, but it's still recommended to use external ESD protection devices, such as TVS diodes or ESD arrays, to protect the device from electrostatic discharge. Follow the recommended PCB layout and handling procedures to minimize the risk of ESD damage.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADA4860-1YRJZ-RL7 Overview

Use the download button to access the ADA4860-1YRJZ-RL7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADA48, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADA4860-1YRJZ-RL7

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

ADA4860-1YRJZ-RL7 Alternates

Showing results

Image Part Number Model
Part Image ADA4860-1YRJZ-RL Analog Devices Inc

Operational Amplifier, 1 Func, 13000uV Offset-Max, PDSO6