Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADF0204 - TE Connectivity

Description: DIP Switches / SIP Switches SPST 2POS FLUSH SIDE DIP SWITCH

Download ADF0204 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADF0204 - TE Connectivity - PCB symbol
click to zoom
PCB Footprints
ADF0204 - TE Connectivity PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - 4POS DIP SWITCH
click to zoom
3D Models
ADF0204 - TE Connectivity - 3D model - Dual-In-Line Packages - 4POS DIP SWITCH
click to zoom

ADF0204 Details

  • Manufacturer Part Number:

    ADF0204

  • Brand Name:

    Alcoswitch

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • HTS Code:

    8536.50.90.65

  • Factory Lead Time:

    17 Weeks, 1 Day

  • Manufacturer:

    TE Connectivity

  • YTEOL:

    7.3

  • Actuator Color:

    WHITE

  • Actuator Material:

    POLYAMIDE6T

  • Actuator Type:

    SLIDE TYPE

  • Additional Feature:

    APPROVAL: UL

  • Body Breadth:

    7.06 mm

  • Body Color:

    BLACK

  • Body Height:

    4 mm

  • Body Length or Diameter:

    7.06 mm

  • Center Contact Material:

    COPPER ALLOY

  • Center Contact Plating:

    GOLD OVER NICKEL

  • Contact Current(AC)-Max:

    1 A

  • Contact Current(DC)-Max:

    0.1 A

  • Contact (DC) Max Rating R Load:

    0.1A@24VDC

  • Contact Function:

    OFF-ON

  • Contact Resistance:

    0.1 mΩ

  • Contact Voltage(DC)-Max:

    24 V

  • Dielectric Withstand Volts:

    300VAC V

  • Electrical Life:

    1000 Cycle(s)

  • End Contact Material:

    COPPER ALLOY

  • End Contact Plating:

    GOLD OVER NICKEL

  • Housing Material:

    POLYPHENYLENE SULPHIDE

  • Insulation Resistance:

    100000000 Ω

  • Insulator Material:

    POLYPHENYLENE SULPHIDE

  • JESD-609 Code:

    e4

  • Mounting Feature:

    THROUGH HOLE-RIGHT ANGLE

  • Number of Positions:

    2

  • Number of Switch Sections:

    2

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -30 °C

  • PCB Hole Count:

    4

  • Packing Method:

    TUBE

  • Surface Mount:

    NO

  • Switch Action:

    LATCHED

  • Switch Function:

    SPST

  • Switch Type:

    SLIDE DIP SWITCH

  • Terminal Finish:

    Gold Flash (Au)

  • Terminal Length:

    0.157 inch

  • Terminal Material:

    COPPER ALLOY

  • Termination Type:

    SOLDER

ADF0204 Frequently Asked Questions (FAQs)

  • TE Connectivity recommends a 4-layer PCB with a solid ground plane and a separate power plane for the ADF0204. The device should be placed near the center of the board, and the input and output tracks should be kept short and away from noise sources.
  • Use a reflow soldering process with a peak temperature of 240°C to 250°C. Apply a small amount of solder paste to the PCB pads, and ensure the ADF0204 is aligned properly before reflow. Avoid using wave soldering or hand soldering, as this can damage the device.
  • The ADF0204 is rated for operation from -40°C to 125°C. However, the device's performance may degrade at extreme temperatures, and the maximum operating temperature range may vary depending on the specific application and environmental conditions.
  • Yes, the ADF0204 is designed to withstand high-vibration environments. However, it's essential to ensure the device is properly secured to the PCB and that the PCB is securely fastened to the system to prevent mechanical stress on the device.
  • Start by verifying the power supply voltage and ensuring it's within the recommended range. Check the input and output signals for proper termination and impedance matching. Use an oscilloscope to inspect the signal waveforms and look for signs of distortion or noise. Consult the datasheet and application notes for specific troubleshooting guidelines.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADF0204 Overview

Use the download button to access the ADF0204 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADF02, or try a keyword search, such as DIP Switches

About TE Connectivity

TE Connectivity, a global leader in connectivity and sensor solutions, designs and manufactures products that enable a more connected world. Serving a diverse range of industries, including automotive, industrial, medical, aerospace, and telecommunications, TE Connectivity offers a broad portfolio of products such as connectors, sensors, relays, and passive components. The company's innovations help improve the reliability and performance of electronic systems.

Parts related to ADF0204

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑