Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADG752BRTZ-REEL7 - Analog Devices

Description: ANALOG DEVICES - ADG752BRTZ-REEL7 - ANALOGUE SWITCH, 1CH, SPDT, SOT-23-6

Download ADG752BRTZ-REEL7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADG752BRTZ-REEL7 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ADG752BRTZ-REEL7 - Analog Devices PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - RJ-6 (SOT23)
click to zoom
3D Models
ADG752BRTZ-REEL7 - Analog Devices - 3D model - SOT23 (6-Pin) - RJ-6 (SOT23)
click to zoom

ADG752BRTZ-REEL7 Details

  • Manufacturer Part Number:

    ADG752BRTZ-REEL7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOT-23

  • Package Description:

    ROHS COMPLIANT, SOT-23, 6 PIN

  • Pin Count:

    6

  • Manufacturer Package Code:

    RJ-6

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Additional Feature:

    CAN ALSO BE OPERATED FROM 4.5 TO 5.5V

  • Analog IC - Other Type:

    SPDT

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e3

  • Length:

    2.9 mm

  • Moisture Sensitivity Level:

    1

  • Normal Position:

    NO/NC

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Off-state Isolation-Nom:

    80 dB

  • On-state Resistance Match-Nom:

    0.2 Ω

  • On-state Resistance-Max (Ron):

    50 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    COMMON OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.45 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    0.0005 mA

  • Supply Voltage-Max (Vsup):

    3.3 V

  • Supply Voltage-Min (Vsup):

    2.7 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    8 ns

  • Switch-on Time-Max:

    18 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Width:

    1.65 mm

ADG752BRTZ-REEL7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the ADG752BRTZ-REEL7 involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, using thermal vias and a heat sink can help dissipate heat and reduce thermal issues.
  • To ensure proper power and decoupling, use a low-ESR capacitor (e.g., 10uF) between VDD and GND, and a smaller capacitor (e.g., 100nF) between VDD and GND near the device. Also, use a 1uF capacitor between AVDD and AGND, and a 100nF capacitor between AVDD and AGND near the device.
  • The ADG752BRTZ-REEL7 can operate up to 200MHz, but the actual frequency limit depends on the specific application, PCB layout, and signal integrity. It's recommended to consult with Analog Devices' application notes and simulation tools to determine the maximum operating frequency for a specific design.
  • To handle thermal management, ensure good airflow around the device, use a heat sink with a thermal interface material, and consider using thermal vias on the PCB. Also, follow Analog Devices' recommended thermal design guidelines and thermal modeling tools to estimate the device's junction temperature.
  • The recommended settings for the internal registers and calibration of the ADG752BRTZ-REEL7 depend on the specific application and requirements. Consult Analog Devices' application notes, datasheet, and evaluation board documentation for guidance on optimal register settings and calibration procedures.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADG752BRTZ-REEL7 Overview

Use the download button to access the ADG752BRTZ-REEL7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADG75, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADG752BRTZ-REEL7

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

ADG752BRTZ-REEL7 Alternates

Showing results

Image Part Number Model
Part Image ADG752BRT-REEL7 Rochester Electronics LLC

1-CHANNEL, SGL POLE DOUBLE THROW SWITCH, PDSO6, SOT-23, 6 PIN
Part Image ADG752BRT-REEL7 Analog Devices Inc

SPDT, 1 Func, 1 Channel, CMOS, PDSO6
Part Image ADG752BRT-REEL Analog Devices Inc

SPDT, 1 Func, 1 Channel, CMOS, PDSO6
Part Image ADG752BRT Analog Devices Inc

SPDT, 1 Func, 1 Channel, CMOS, PDSO6