Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADM232LJNZ - Analog Devices

Description: ADM232LJNZ (TUBE) ADM232LJNZ, Line Transceiver, EIA-232-E, RS-232, V.28 2-TX 2-RX 2-TRX, 5 V, 16-Pin PDIP

Download ADM232LJNZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADM232LJNZ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ADM232LJNZ - Analog Devices PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - (N-16)
click to zoom
3D Models
ADM232LJNZ - Analog Devices - 3D model - Dual-In-Line Packages - (N-16)
click to zoom

ADM232LJNZ Details

  • Manufacturer Part Number:

    ADM232LJNZ

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    DIP

  • Package Description:

    LEAD FREE, PLASTIC, MO-095AC, DIP-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    N-16

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Additional Feature:

    INTERNAL CHARGE PUMP

  • Differential Output:

    NO

  • Driver Number of Bits:

    2

  • High Level Input Current-Max:

    0.0000025 A

  • Input Characteristics:

    SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-232-E; V.28

  • JESD-30 Code:

    R-PDIP-T16

  • JESD-609 Code:

    e3

  • Length:

    19.43 mm

  • Number of Functions:

    2

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    70 °C

  • Out Swing-Min:

    10 V

  • Output Characteristics:

    TOTEM-POLE

  • Output Polarity:

    INVERTED

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP16,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Qualification Status:

    Not Qualified

  • Receiver Number of Bits:

    2

  • Seated Height-Max:

    4.57 mm

  • Supply Current-Max:

    6 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    4.5 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    NO

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Width:

    7.62 mm

ADM232LJNZ Frequently Asked Questions (FAQs)

  • A good layout and routing practice is to keep the analog and digital grounds separate, use a solid ground plane, and keep the signal traces short and away from noise sources. Also, use a common mode choke or ferrite bead to filter the power supply lines.
  • Proper termination is crucial for the ADM232LJNZ. Ensure that the transmitter output is terminated with a 120-ohm resistor to match the characteristic impedance of the transmission line, and that the receiver input is terminated with a 1-kohm resistor to prevent signal reflections.
  • The maximum cable length supported by the ADM232LJNZ is approximately 100 meters. However, the signal integrity may degrade with longer cable lengths due to attenuation and signal reflections. It's recommended to use a repeater or a signal conditioner for longer cable lengths.
  • To prevent damage or latch-up, ensure that the power supply voltage (VCC) is applied before the transmitter input signal, and that the transmitter input signal is removed before the power supply voltage is removed. A power-up/down sequencing circuit can be used to ensure proper sequencing.
  • The ADM232LJNZ has a maximum junction temperature of 150°C. Ensure good thermal conduction by using a heat sink or a thermal pad, and avoid operating the device in high-temperature environments without proper cooling. Also, reduce the power consumption or use a lower power version of the device if possible.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADM232LJNZ Overview

Use the download button to access the ADM232LJNZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADM23, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADM232LJNZ

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

ADM232LJNZ Alternates

Showing results

Image Part Number Model
Part Image ADM232LANZ Analog Devices Inc

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDIP16
Part Image ADM232LAN Analog Devices Inc

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDIP16
Part Image ADM232LJN Analog Devices Inc

Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDIP16