Part Image

ADM3065EBRZ-R7 - Analog Devices

Description: ► TIA/EIA RS-485 compliant over full supply range ► 3.0 V to 5.5 V operating voltage range on VCC ► 1.62 V to 5.5 V VIO logic supply option available ► ESD protection on the bus pins ► IEC 61000-4-2 ≥ ±12 kV contact discharge ► IEC 61000-4-2 ≥ ±12 kV air discharge ► HBM ≥ ±30 kV ► Full hot swap support (glitch free power-up/power-down) ► High speed 50 Mbps data rate (ADM3065E/ADM3066E/ ADM3067E/ADM3068E) ► Low speed 500 kbps data rate for long cables (ADM3061E/ ADM3062E/ADM3063E/ADM3064E) ► Full

Download ADM3065EBRZ-R7 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ADM3065EBRZ-R7 - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - ADM3065EBRZ-R7
click to zoom
3D Models
ADM3065EBRZ-R7 - Analog Devices  - 3D model - Small Outline Packages - ADM3065EBRZ-R7
click to zoom

ADM3065EBRZ-R7 Details

  • Manufacturer Part Number:

    ADM3065EBRZ-R7

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    R-8

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Date Of Intro:

    2017-05-17

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.00002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-485; TIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    DIFFERENTIAL

  • Output Low Current-Max:

    0.002 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.24

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    35 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    7.5 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    5.5 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    15 ns

  • Width:

    3.9 mm

ADM3065EBRZ-R7 Frequently Asked Questions (FAQs)

  • A good PCB layout for the ADM3065EBRZ-R7 involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended.
  • The ADM3065EBRZ-R7 requires a stable power supply with minimal noise and ripple. Use a high-quality voltage regulator and decouple the device with 0.1uF and 10uF capacitors between VCC and GND, placed close to the device.
  • The ADM3065EBRZ-R7 can support data rates up to 100 Mbps, but the actual achievable data rate depends on the specific application, cable length, and noise environment.
  • Use a logic analyzer or oscilloscope to monitor the signal quality and timing. Check the power supply, decoupling, and PCB layout. Verify that the device is properly configured and that the transmit and receive lines are properly terminated.
  • The ADM3065EBRZ-R7 is rated for operation from -40°C to 85°C, but it can be used in harsh environments with proper design considerations, such as using a heat sink, conformal coating, and vibration-resistant mounting.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADM3065EBRZ-R7 Overview

Use the download button to access the ADM3065EBRZ-R7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADM30, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADM3065EBRZ-R7

Showing 0 results

ADM3065EBRZ-R7 Alternates

Showing results

Image Part Number Model
Part Image ADM3065EBRZ Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8

Part Image ADM3065EARZ-R7 Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8

Part Image ADM3065EARZ Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8