Part Image

ADM3486EARZ - Analog Devices

Description: Line Transceiver 1TR 1TX 1RX 8-Pin SOIC

Download ADM3486EARZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ADM3486EARZ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - SOIC 8_2020
click to zoom
3D Models
ADM3486EARZ - Analog Devices  - 3D model - Small Outline Packages - SOIC 8_2020
click to zoom

ADM3486EARZ Details

  • Manufacturer Part Number:

    ADM3486EARZ

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    LEAD FREE, MS-012-A, SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    R-8

  • Country Of Origin:

    Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Additional Feature:

    DATA RATES UPTO 2.5 MBPS

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    5 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.0025 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    120 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    2.2 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Transmit Delay-Max:

    75 ns

  • Width:

    3.9 mm

ADM3486EARZ Frequently Asked Questions (FAQs)

  • A good PCB layout for the ADM3486EARZ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, using a shielded enclosure and minimizing the length of the digital signal traces can help reduce EMI.
  • To ensure reliable communication with the ADM3486EARZ in noisy industrial environments, use a shielded cable, keep the cable length as short as possible, and use a common-mode choke or ferrite bead to filter out noise. Additionally, consider using a repeater or isolator to boost the signal and provide electrical isolation.
  • The maximum cable length supported by the ADM3486EARZ depends on the baud rate and the type of cable used. As a general rule, the maximum cable length is 100 meters at 9600 bps, 50 meters at 19200 bps, and 20 meters at 115200 bps. However, these lengths can be extended using repeaters or isolators.
  • To troubleshoot communication issues with the ADM3486EARZ, start by checking the power supply voltage, then verify that the transmit and receive lines are properly connected. Use a logic analyzer or oscilloscope to check the signal integrity and baud rate. If the issue persists, try swapping the transmitter and receiver lines or replacing the device.
  • Yes, the ADM3486EARZ can be used in a half-duplex configuration by connecting the transmitter output to the receiver input through a directional coupler or a switch. This allows the device to transmit and receive data on the same line, but not simultaneously.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ADM3486EARZ Overview

Use the download button to access the ADM3486EARZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADM34, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADM3486EARZ

Showing 0 results

ADM3486EARZ Alternates

Showing results

Image Part Number Model
Part Image ADM3486EARZ-REEL7 Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8