Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ADM487EWARZ - Analog Devices

Description: 5 V, ±15 kV ESD Protected Half-Duplex Transceivers

Download ADM487EWARZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ADM487EWARZ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ADM487EWARZ - Analog Devices PCB footprint - Other - Other - SOIC127P600X175-8N
click to zoom
3D Models
ADM487EWARZ - Analog Devices - 3D model - Other - SOIC127P600X175-8N
click to zoom

ADM487EWARZ Details

  • Manufacturer Part Number:

    ADM487EWARZ

  • Source Url Status Check Date:

    2013-05-01 14:56:41.811

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    ROHS COMPLIANT, MS-012AA, SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    R-8

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Low Current-Max:

    0.004 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    200 ns

  • Receiver Number of Bits:

    1

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    0.9 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    4.5 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    60 ns

  • Width:

    3.9 mm

ADM487EWARZ Frequently Asked Questions (FAQs)

  • A good PCB layout for the ADM487EWARZ involves keeping the signal traces short and away from noise sources, using a solid ground plane, and placing the device close to the isolation barrier. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure reliable operation of the ADM487EWARZ in high-temperature environments, it's essential to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive material for the PCB, and ensuring good airflow around the device. Additionally, the device should be operated within its specified temperature range of -40°C to +125°C.
  • When using the ADM487EWARZ in a system with multiple power domains, it's essential to ensure that the device is powered from a single power domain and that the power supply is clean and stable. Additionally, the device's input and output signals should be properly isolated and buffered to prevent noise and signal degradation.
  • To troubleshoot issues with the ADM487EWARZ, start by verifying that the device is properly powered and that the input and output signals are within the specified ranges. Check for any signs of physical damage or overheating, and ensure that the device is properly soldered and connected to the PCB. If the issue persists, consult the datasheet and application notes, and consider contacting Analog Devices Inc. support for further assistance.
  • When using the ADM487EWARZ in a system with high-frequency signals, it's essential to ensure that the device is properly bypassed and that the input and output signals are properly filtered and terminated. Additionally, the device's signal traces should be kept short and away from noise sources, and the system should be designed to minimize electromagnetic interference (EMI) and radio-frequency interference (RFI).

Trust Checks

This model has been verified by system checks.
System Verified
Sponsored

ADM487EWARZ Overview

Use the download button to access the ADM487EWARZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ADM48, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to ADM487EWARZ

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑