Broadcom recommends a 4-layer PCB with a solid ground plane, and thermal vias under the package to dissipate heat. A thermal pad on the bottom of the package should be connected to a thermal plane on the PCB.
Use a differential pair routing for the high-speed signals, keep the signal traces short and away from noise sources, and use a common mode filter or EMI filter on the input/output signals.
Power up the device in the following sequence: VCC, AVCC, and then DVCC. The reset timing is typically 10ms, but this can vary depending on the specific application and requirements.
Consult the Broadcom application notes and design guides for specific recommendations on optimizing the device's performance for your application, including settings for the internal PLL, clocking, and signal conditioning.
The AEAT-601B-F06 is rated for industrial temperature range (-40°C to 85°C), and is compliant with relevant industry standards for reliability, such as JEDEC and IPC.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
AEAT-601B-F06 Overview
Use the download button to access the AEAT-601B-F06 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like AEAT-,
or try a keyword search, such as Optical Position Encoders
