Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AFBR-2419Z - Avago Technologies

Description: Fiber Optic Receiver Optical 50MBd -27dBm 3.135V ~ 5.25V 20 mA

Download AFBR-2419Z Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AFBR-2419Z - Avago Technologies - PCB symbol
click to zoom
PCB Footprints
AFBR-2419Z - Avago Technologies PCB footprint - Other - Other - AFBR-2419Z-2
click to zoom
3D Models
AFBR-2419Z - Avago Technologies - 3D model - Other - AFBR-2419Z-2
click to zoom

AFBR-2419Z Details

  • Manufacturer Part Number:

    AFBR-2419Z

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    DIP

  • Reach Compliance Code:

    Compliant

  • Manufacturer:

    Avago Technologies

  • YTEOL:

    5

  • Additional Feature:

    IT ALSO HAS NOMINAL SUPPLY VOLTAGE 5 VOLTS

  • Body Breadth:

    12.7 mm

  • Body Height:

    10.2 mm

  • Body Length or Diameter:

    12.7 mm

  • Connection Type:

    ST CONNECTOR

  • Emitter/Detector Type:

    PHOTODIODE

  • Fiber Optic Device Type:

    RECEIVER

  • Fiber Type:

    62.5/125, MMF

  • JESD-609 Code:

    e3

  • Mounting Feature:

    THROUGH HOLE MOUNT

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Operating Wavelength-Max:

    865 nm

  • Operating Wavelength-Min:

    792 nm

  • Operating Wavelength-Nom:

    820 nm

  • Package Style:

    DIP

  • Reception Type:

    DIGITAL

  • Responsivity:

    0.65 A/W

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    3.135 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    NO

  • Terminal Finish:

    Tin (Sn)

AFBR-2419Z Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the edge of the board to minimize signal reflections. A 50-ohm microstrip transmission line should be used to connect the device to the antenna.
  • The device requires a single 3.3V power supply. A 10uF capacitor should be connected between the VCC pin and ground to filter out noise. A 1kohm resistor should be connected between the EN pin and VCC to enable the device.
  • The device is rated for operation from -40°C to 85°C. However, the optimal operating temperature range is from 0°C to 70°C for maximum performance and reliability.
  • Use a spectrum analyzer to check the transmitted signal spectrum for any distortions or spurs. Verify that the device is properly biased and that the PCB layout is correct. Check for any signs of overheating or physical damage to the device.
  • Yes, multiple AFBR-2419Z devices can be used in a single system. However, each device should have its own power supply and ground plane to minimize interference. A common clock signal can be used to synchronize the devices.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AFBR-2419Z Overview

Use the download button to access the AFBR-2419Z schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AFBR-, or try a keyword search, such as Fiber Optic Receivers

Parts related to AFBR-2419Z

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑