AISR-01-104J - ABRACON

AISR-01-104J Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance of the AISR-01-104J?
  Abracon recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a signal layer on the top layer. The oscillator should be placed close to the microcontroller, and the PCB should be designed to minimize noise and EMI.
• How do I ensure the AISR-01-104J oscillator starts up reliably in my design?
  To ensure reliable startup, Abracon recommends a power-up sequence that allows the voltage to rise slowly (typically 1-10 ms) to the recommended operating voltage. Additionally, the oscillator should be decoupled with a 0.01-0.1 uF capacitor to reduce noise and ensure stable operation.
• What is the maximum operating temperature range for the AISR-01-104J?
  The AISR-01-104J is rated for operation from -40°C to +85°C, but Abracon recommends derating the frequency by 0.05% per degree Celsius above 70°C to ensure reliable operation.
• Can I use the AISR-01-104J in a design that requires a different frequency than the standard 10.0 MHz?
  Yes, Abracon offers custom frequency options for the AISR-01-104J. Contact Abracon's sales team to discuss custom frequency requirements and lead times.
• How do I handle ESD protection for the AISR-01-104J in my design?
  Abracon recommends using ESD protection devices, such as TVS diodes or ESD arrays, to protect the AISR-01-104J from electrostatic discharge. The protection devices should be placed close to the oscillator and connected to the power and ground pins.