Please enter a minimum 3 letters or numbers
Technical Content
Part Image

AMP04EPZ - Analog Devices

Description: AMP04EPZ, Instrumentation Amplifier, 0.15mV Offset, 90dB CMRR, 12 V, 15 V, 18 V, 24 V, 28 V, 9 V, 8-Pin PDIP

Download AMP04EPZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
AMP04EPZ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
AMP04EPZ - Analog Devices PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - 8pin dip
click to zoom
3D Models
AMP04EPZ - Analog Devices - 3D model - Dual-In-Line Packages - 8pin dip
click to zoom

AMP04EPZ Details

  • Manufacturer Part Number:

    AMP04EPZ

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    DIP

  • Package Description:

    MINI, PLASTIC, DIP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    N-8

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    INSTRUMENTATION AMPLIFIER

  • Average Bias Current-Max (IIB):

    0.05 µA

  • Bandwidth (3dB)-Nom:

    0.7 MHz

  • Common-mode Reject Ratio-Min:

    55 dB

  • Input Offset Current-Max (IIO):

    0.015 µA

  • Input Offset Voltage-Max:

    600 µV

  • JESD-30 Code:

    R-PDIP-T8

  • JESD-609 Code:

    e3

  • Length:

    9.88 mm

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    5.33 mm

  • Slew Rate-Nom:

    0.12 V/us

  • Supply Current-Max:

    1.1 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    NO

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Voltage Gain-Max:

    1000

  • Voltage Gain-Min:

    1

  • Voltage Gain-Nom:

    10

  • Width:

    7.62 mm

AMP04EPZ Frequently Asked Questions (FAQs)

  • A good PCB layout for the AMP04EPZ involves keeping the input and output traces short and symmetrical, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
  • The gain resistor (Rg) value depends on the desired gain and bandwidth. A higher Rg value increases gain but reduces bandwidth. A good starting point is to use the recommended Rg value from the datasheet and adjust based on your specific application requirements.
  • The maximum power dissipation for the AMP04EPZ is 1.4W. However, this value can be affected by the ambient temperature, PCB layout, and airflow. It's essential to ensure proper thermal management to prevent overheating.
  • Yes, the AMP04EPZ can be used in a single-supply configuration. However, this requires careful consideration of the input common-mode voltage range and the output voltage swing. A voltage divider or a virtual ground circuit may be necessary to ensure proper operation.
  • To minimize noise and EMI, use a low-noise power supply, decouple the power pins with capacitors, and use a shielded enclosure. Additionally, keep the input and output traces away from each other and from other noisy signals, and use a common-mode choke or ferrite beads to filter out high-frequency noise.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

AMP04EPZ Overview

Use the download button to access the AMP04EPZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AMP04, or try a keyword search, such as Instrumentation Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to AMP04EPZ

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

AMP04EPZ Alternates

Showing results

Image Part Number Model
Part Image AMP04FPZ Analog Devices Inc

Instrumentation Amplifier, 1 Func, 900uV Offset-Max, 0.7MHz Band Width, PDIP8
Part Image AMP04EP Analog Devices Inc

Instrumentation Amplifier, 1 Func, 600uV Offset-Max, 0.7MHz Band Width, BIPolar, PDIP8
Part Image AMP04FP Analog Devices Inc

Instrumentation Amplifier, 1 Func, 900uV Offset-Max, 0.7MHz Band Width, BIPolar, PDIP8