AMPDEFH-A04T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

AMPDEFH-A04T Details

Abracon recommends a symmetrical PCB layout with a solid ground plane and a 50-ohm transmission line to ensure optimal performance and minimize signal reflections.
The output termination depends on the specific application and load impedance. Abracon recommends using a 50-ohm termination for most applications, but a 75-ohm termination may be required for certain video applications. Consult the datasheet and application notes for more information.
The AMPDEFH-A04T is rated for operation from -40°C to +85°C, but derating may be required for high-frequency applications or extreme environmental conditions. Consult the datasheet and application notes for more information.
Yes, but the device's performance may be affected. Abracon recommends using the AMPDEFH-A04T in a 50-ohm system for optimal performance, but it can be used in non-50-ohm systems with proper impedance matching and signal conditioning.
Abracon recommends using a 10-uF ceramic capacitor and a 100-nF ceramic capacitor in parallel, placed as close as possible to the device's power pins, to ensure proper power supply decoupling and noise reduction.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AMPDEFH-A04T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AMPDE, or try a keyword search, such as XO

Showing 0 results

Image	Part Number	Model
	AMPDEFH-A04 Abracon Corporation CMOS Output Clock Oscillator, 74.25MHz Nom
	AMPDEDH-A04 Abracon Corporation CMOS Output Clock Oscillator, 74.25MHz Nom
	AMPDEDH-A04T Abracon Corporation CMOS Output Clock Oscillator, 74.25MHz Nom
	AMPDEFH-A04T3 Abracon Corporation CMOS Output Clock Oscillator, 74.25MHz Nom
For a full list of alternate parts for AMPDEFH-A04T, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →