AMPMDFB-12.2880T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

AMPMDFB-12.2880T Details

Abracon recommends a 4-layer PCB with a solid ground plane, and a 50-ohm microstrip transmission line for the output. A decoupling capacitor (e.g., 100nF) should be placed close to the device.
The AMPMDFB-12.2880T requires a 50-ohm load termination. Ensure the output is connected to a 50-ohm load or a 50-ohm terminator to prevent signal reflections and ensure optimal frequency response.
Abracon recommends using a 10uF capacitor in parallel with a 100nF capacitor, both connected between the VCC pin and GND, to ensure stable power supply decoupling.
The AMPMDFB-12.2880T has a maximum junction temperature of 150°C. Ensure good airflow, use a heat sink if necessary, and avoid blocking the airflow around the device to prevent overheating.
Abracon recommends a soldering profile with a peak temperature of 240°C, a dwell time of 30-60 seconds, and a cooling rate of 4°C/second to prevent thermal shock.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AMPMDFB-12.2880T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AMPMD, or try a keyword search, such as XO

Showing 0 results

Image	Part Number	Model
	AMPMDDB-12.2880T3 Abracon Corporation CMOS Output Clock Oscillator, 12.288MHz Nom
	AMPMDDB-12.2880 Abracon Corporation CMOS Output Clock Oscillator, 12.288MHz Nom
	AMPMDDB-12.2880T Abracon Corporation CMOS Output Clock Oscillator, 12.288MHz Nom
	AMPMDFB-12.2880T3 Abracon Corporation CMOS Output Clock Oscillator, 12.288MHz Nom
For a full list of alternate parts for AMPMDFB-12.2880T, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →