AMPMEFB-50.0000T footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

AMPMEFB-50.0000T Details

Abracon recommends a symmetrical PCB layout with a solid ground plane, and to keep the crystal and capacitors as close as possible to the oscillator pins. A 4-layer PCB with a dedicated ground plane is also recommended.
To ensure reliable startup, Abracon recommends using a 1-2 kΩ resistor in series with the crystal, and a 10-22 pF capacitor from each oscillator pin to ground. Additionally, the PCB layout should be designed to minimize noise and interference.
The AMPMEFB-50.0000T is rated for operation from -40°C to +85°C, but Abracon recommends derating the frequency tolerance by 5 ppm/°C for temperatures above 70°C.
Yes, the AMPMEFB-50.0000T is designed to withstand vibrations up to 20 G peak acceleration, but Abracon recommends following proper mounting and soldering procedures to ensure reliable operation.
Abracon recommends using ESD protection devices such as TVS diodes or ESD arrays on the oscillator pins, and following proper handling and storage procedures to prevent ESD damage.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AMPMEFB-50.0000T schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AMPME, or try a keyword search, such as XO

Showing 0 results

Image	Part Number	Model
	AMPMEDB-50.0000 Abracon Corporation CMOS Output Clock Oscillator, 50MHz Nom
	AMPMEFB-50.0000 Abracon Corporation CMOS Output Clock Oscillator, 50MHz Nom
	AMPMEDB-50.0000T3 Abracon Corporation CMOS Output Clock Oscillator, 50MHz Nom
	AMPMEFB-50.0000T3 Abracon Corporation CMOS Output Clock Oscillator, 50MHz Nom
For a full list of alternate parts for AMPMEFB-50.0000T, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →