AOTA-B252010S3R3MT footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

AOTA-B252010S3R3MT Details

Abracon recommends a layout with a solid ground plane, minimal signal trace length, and a decoupling capacitor (e.g., 0.01 μF) between VCC and GND, placed as close as possible to the oscillator.
The oscillator is designed to operate up to 125°C, but its frequency stability and accuracy may degrade at higher temperatures. Abracon recommends consulting the temperature coefficient of frequency (TCF) specification in the datasheet for more information.
Yes, the AOTA-B252010S3R3MT is designed to minimize electromagnetic interference (EMI). Abracon recommends following proper PCB layout and shielding techniques to further reduce EMI.
Abracon recommends using a 0.01 μF to 0.1 μF decoupling capacitor between VCC and GND, placed as close as possible to the oscillator, to filter out noise and ensure stable operation.
The oscillator is designed to start oscillating within 5 ms of power-up and to stop oscillating within 1 ms of power-down. Abracon recommends consulting the datasheet for more information on power-up and power-down behavior.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the AOTA-B252010S3R3MT schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like AOTA-, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →