A good PCB layout for optimal thermal performance involves placing thermal vias under the IC, using a solid ground plane, and keeping the thermal path short and direct to the heat sink or thermal pad.
To ensure stable output voltage regulation, make sure to follow the recommended input and output capacitor values, and provide a stable input voltage within the specified range. Additionally, minimize the loop area of the feedback network and use a low-ESR output capacitor.
The maximum allowable ripple current for the input capacitor depends on the specific capacitor used. As a general rule, choose an input capacitor with a ripple current rating of at least 1A to ensure reliable operation.
While ceramic capacitors can be used for the output filter, they may not be the best choice due to their limited capacitance and high ESR. A low-ESR electrolytic or polymer capacitor is recommended for the output filter to ensure stable operation and minimize output voltage ripple.
To calculate the power dissipation of the AP65200S-13, use the following formula: Pd = (Vin - Vout) x Iout + (Vin x Iq), where Vin is the input voltage, Vout is the output voltage, Iout is the output current, and Iq is the quiescent current.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
AP65200S-13 Overview
Use the download button to access the AP65200S-13 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like AP652,
or try a keyword search, such as Switching Regulator or Controllers
