A good PCB layout for APF30218 involves keeping the input and output traces short and separate, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure stability, make sure to follow the recommended component values and PCB layout. Also, add a 10nF to 100nF capacitor between the VIN pin and the GND pin to prevent oscillation. Additionally, use a low-ESR output capacitor and ensure the output voltage is within the recommended range.
Although the datasheet specifies a maximum input voltage of 18V, it's recommended to limit the input voltage to 15V to ensure reliable operation and prevent damage to the device.
The APF30218 is rated for operation up to 85°C, but it's recommended to derate the output current and input voltage at higher temperatures to ensure reliable operation. Consult the datasheet for thermal derating guidelines.
The output voltage ripple and noise can be calculated using the formulae provided in the datasheet. Additionally, consider the output capacitor's ESR, ESL, and capacitance value, as well as the switching frequency and inductor value, to accurately estimate the output voltage ripple and noise.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
APF30218 Overview
Use the download button to access the APF30218 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like APF30,
or try a keyword search, such as Power/Signal Relays
